BACTERIOLOGICAL INCUBATOR (LAB MODEL)
BACTERIOLOGICAL INCUBATOR (MEMMERT MODEL)
DIGITAL DISPLAY INCUBATOR
SEE THROUGH INCUBATOR |
|
Double Walled, outer body of Made Mild Steel, inner made of Mild Steel/Aluminum/ Stainless steel lagged with glass wool, Temperature is controlled by capillary type hydraulic thermostat with + 0.5º C accuracy Temperature Range ambient 5ºC to 60º C. Glass door is provided FITTED with FORCED AIR CIRCULATION ( i.e. fan & Motor arrangement) at bottom Solid State Temp controller with Front Dial to set the Temperature Three side heaters made of Nichrome Wire provided for MEMMERT MODEL. |
Chamber Size
|
Watts |
Shelves |
| A |
12” x 12”x 12” (30x
30 x 30cm) |
250 |
1 |
| B |
14” x 14” x 14” (35 x 35 x 35 cm) |
300 |
2 |
| C |
18” x 18 “x 18” (45 x 45 x 45 cm) |
500 |
2 |
| D |
18” x 18 “x 24 “ (45 x 45 x 60 cm) |
600 |
3 |
| E |
20” x 20 “ x 24” (50 x 50 x 60 cm) |
600 |
3 |
| F |
24” x 24” x 24” (60 x 60 x 60 cm) |
900 |
3 |
| G |
18” x 24” x 36” (45 x 60 x 90 cm) |
900 |
3 |
| H |
24” x 24” x 36” (60 x 60 x 90 cm) |
1000 |
3 |
|
|
B.O.D. COOLED INCUBATOR (DIGITAL DISPLAY)
MICROPORCESSOR BASED B.O.D. COOLED INCUBATOR:
Double walled , interior of Stainless Steel . Exterior of Mild Steel finished in powder coating epoxy paint. Full length inner glass door and outside metal door with magnetic gasket and lock. Two perforated removable stainless steel tray at fix distance. Unit consists of DIGITAL DISPLAY Temperature Indicating Electronic Controller with PT-100 as a sensor. Pilot lamps for all switches and controls. Automatic chamber light. Forced Air Circulation for uniform temp. Hermetically sealed compressor. Unit with electronics time delay to safe guard compressor, castor wheel for easy movability. Units works on 230 Volts AC 50 Hz Main supply. Temperature range : 5 ºC to 50º C Accuracy + 0.5º C. Chamber Illumination using 4 fluorescent tube light of 2ft with Programmable 24 hrs Timer for DAY / NIGHT effect can be provided |
| Model |
Size in cms |
Cuft |
Capacity-ltr |
| ASC-4A(3 SS) |
45 X45 X 45D |
3 |
90 |
| ASC-4A(6 SS) |
70 X50 X 50D |
6 |
165 |
| ASC-4A(10 SS) |
90 X55 X 55D |
10 |
287 |
| ASC-4A(12 SS) |
90 X60 X 60D |
12 |
324 |
| ASC-4A(16SS) |
90 X70 X 70D |
16 |
440 |
|
|
* HOT AIR OVEN LABORATORY MODEL
* HOT AIR OVEN MEMMERT MODEL
* DIGITAL DISPLAY OVEN
* ELECTRODE DRYING OVEN
* HIGH TEMPERATURE OVEN
* TOP AIR CIRCULATION HOT AIR OVEN
* DOUBLE WALLED, OUTER MADE OF MILD STEEL & INNER IS MADE OF EITHER MILD STEEL / ALUMINUM / STAINLESS STEEL LAGGED WITH GLASS WOOL. BOTTOM HEATERS MADE OF NICHROME WIRE. TEMPERATURE IS CONTROLLED BY SENSITIVE HYDRAULIC THERMOSTAT WITH + 10C ACCURACY TEMPERATURE RANGE 50 0 C TO 250 0 C. ALSO PROVIDE FORCED AIR CIRCULATION & DIGITAL TEMPERATURE CONTROLLER CUM INDICATORS. |
| Chamber Size in Inches & Cms |
Watts |
Shelves |
| a) 12” x 12”x 12” (30 x 30 x 30 cm) |
500 |
1 |
| b) 14” x 14” x 14” (35 x 35 x 35 cm) |
750 |
1 |
| c) 18” x 18 “x 18” (45 x 45 x 45 cm) |
1000 |
2 |
| d) 18” x 18 “x 24 “ (45 x 45 x 60 cm) |
1500 |
2 |
| e) 20” x 20 “ x 24” (50 x 50 x 60 cm) |
1750 |
2 |
| f) 24” x 24” x 24” (60 x 60 x 60 cm) |
1850 |
3 |
| g) 18” x 24” x 36” (45 x 60 x 90 cm) |
2000 |
3 |
| h) 24” x 24” x 36” (60 x 60 x 90 cm) |
2200 |
3 |
| I) 12” x 12”x 12” (30 x 30 x 30 cm) |
2500 |
3 |
|
|
HUMIDITY CONTROL OVEN DIGITAL DISPLAY:
(ENVIRONMENTAL TEST CHAMBERS)
Double walled , Interior made of Stainless Steel . Exterior of Mild Steel Finished in paint Full length inner glass door and outside metal door with magnetic gasket and lock . Two perforated removable trays at fixed distance are provided of Stainless Steel . Unit consists of Main switch, fuse, and pilot lamps for all controls. DIGITAL DISPLAY Electronics temp. Controllers for Dry & Wet bulbs. Humidity by steam injection controlled by Dry & Wet bulbs . principles and set by Chart provided. Forced air circulation for uniform temp. In case of cooling models by
Hermetically sealed compressor coupled with evaporation coil and condenser, safe guard by time delay circuit . Unit works on 230 Volts Ac, 50 Hz. Main supply
Temperature Accuracy + 10 C , Humidity Accuracy + 3% RH
We provide Microprocessor Based Humidity Oven as per customer specification. |
|
5 0 C above ambient to 60 0 C Temp.
Humidity Range : Ambient to 95% RH |
Temp: Range 10 0 C to 60 0 C
humidity Range 40% to 95% RH |
Temp Range 20 0 C to 60 0 C
Humidity Range 40% to 95%
RH (bet 10 0 C to 60 0 C ) |
| (a) 70 x 50 x 50 |
(a) 70 x 50 x 50 |
(a) 70 x 50 x 50 |
| (b) 90 x 55 x 55 |
(b) 90 x 55 x 55 |
(b) 90 x 55 x 55 |
| (c) 90 x 60 x 60 |
(c) 90 x 60 x 60 |
(c) 90 x 60 x 60 |
| (d) 90 x 70 x 70 |
(d) 90 x 70 x 70 |
(d) 90 x 70 x 70 |
 |
HOT PLATE ROUND ( FOR LABORATORY USE):
Made of cast iron / Stainless Steel top and body is of Thick Mild Steel painted
attractively with 3 Heat Control Switch and Thermostatic By Sunvic Regulator |
| Size |
Rating |
Size |
Rating |
| 8” Dia |
1.5 K.W. |
12 “Dia |
2.0 K.W. |
| 9” Dia |
1.6 K.W. |
8 “ Dia Double |
3.0 K.W. |
| 10” Dia |
1.7 K.W. |
|
|
ASC-13 HOT PLATE RECTANGULAR:
Body made of thick Mild Steel painted attractively.The thick iron /Stainless Steel plate is
provided on the top with 3 Heat Control Switch and Thermostatic By Sunvic Regulator |
| Size |
Rating |
Size |
Rating |
| 10“ x 12 “ |
1.5 K.W. |
12 “ x 20” |
2.0 K.W. |
| 10” x 16” |
1.5 K.W. |
18” x 24” |
3.0 K.W. |
| 12” x 18” |
2.0 K.W. |
24” x 24” |
3.0 K.W. |
|
|
MAGNETIC STIRRER:
Stainless Steel top with Electronic speed Regulator. The stirrer unit is housed in robust fabricated sheet metal housing designed for easy and vibration free operation . Ventilation lowers are provided for internal cooling. Both the rotating magnetic field from a balanced permanent Magnet to induce variable speed stirring action in closed or open laboratory Glass one non-magnetic field from a balanced permanent magnet to reduce variable speed stirring action in closed or open laboratory glass one non-magnetic vessels. Stirring is accomplished by means of a small paddle placed in the liquid to be stirred. The stirrer speed can be varied up to 1200 RPM. Provided with one Teflon coated(PTFE) magnetized stirring BAR Working on 230 volts 50 Cycles. |
| Capacity |
500 ml. |
1 Ltr |
2 Ltr. |
5 Ltr. |
10 Ltr. |
| |
20 Ltr. |
25 Ltr. |
50 Ltr. |
75 Ltr. |
100 Ltr. |
|
|
HOT PLATE RECTANGULAR:
Body made of thick Mild Steel painted attractively.The thick iron /Stainless Steel plate is provided on the top with 3 Heat Control Switch and Thermostatic By Sunvic Regulator |
| Size |
Rating |
Size |
Rating |
| 10 x 12 |
5 K.W. |
12 x 20 |
2.0 K.W. |
| 10 x 16 |
1.5 K.W. |
18 x 24 |
3.0 K.W. |
| 12 x 18 |
2.0 K.W. |
24 x 24 |
3.0 K.W. |
|
 |
WITH MOTOR HOT PLATE MAGNETIC STIRRER:
The improved hot plate magnetic stirrer is equipped with hot plate with a heated capacity, which ensures uniform heating on the surface. The hot plate heating is controlled by an Energy Regulator which regulates the heating at any percentage of the total heater .The stirrer unit is thermally insulated from the hot plate by asbestos cement Buffer surface. |
| Capacity |
1 Ltr. |
2 Ltr. |
5 Ltr. |
10 Ltr. |
|
|
TRAY DRYER: Temp 150°C and Temp 250°C
Double walled Mild Steel & angle iron construction and forced Air Circulation arrangement from sides. Strip Heaters. Inlet outlet dampers & Temperature Indicator with control gears is provided. |
| .No. of Trays |
Approx: Inside Dimension |
| a) 12 |
33” x 33” x 17” D |
| b) 24 |
33” x 33” x 34” D |
| c) 48 |
68” x 39” x 36” D |
| d) 24 |
33” x 33” x 34” D |
| Digital Display Temperature Indicating Controller with PT-100 as sensorDigital Timer for Time Setting |
| Aluminium Tray |
18 SWG |
16 SWG |
| Size 32” x 16” x 1.1/4” |
|
|
| -do Stainless Steel(304 Quality) |
|
|
Mild Steel and STAINLESS STEELTROLLY to accommodate a total No, of trays of size
32” x 16” x 1.1/4” (Required for 48, 96, Tray Dryer Models only. |
|
We can supply above dryers with Digital Programmable control systems with time & temperature presetting arrangement. Circular Chart recorder can be supplied with above Dryers. We can provide Circuit Brackers to avoid leakage current problems & to protect the unit from short circuit |
|
LIGHT WEIGHT MUFFLE FURNACE:
Temp 9300 C Rectangular horizontal electric Muffle Furnace, working temperature
9300 C / 1200 0 C complete with Control gears. Bulb Mains. Lead wire, Thermocouple and Thermal fuse working on 230 Volts AC single phase. |
| Muffle Size |
Rating Watts |
| a) 9”x4”x4 |
1600 |
| b) 10”x5”x5 |
2000 |
| c) 12”x6”x6” |
3000 |
| d) 18”x9”x9” |
6000 |
SPARES MUFFLE WITH COIL:
With coil wounded with heating elements and embedded with heat resistance
ceramic fibre wool insulation and extra long terminals for easy wiring. |
| Muffle Size 9300C |
Rating |
Muffle Size 12000C |
Rating |
| a) 9” x 4” x 4” |
1.6 K.W. |
a) 9” x 4” x 4” |
2.0K.W |
| b) 10” x 5” x 5” |
2.0 K.W. |
b) 10” x 5” x 5” |
2.5K.W |
| c) 12” x 6” x 6” |
3.5 K.W. |
c) 12” x 6” x 6” |
3.5K.W |
| d) 18” x 9” x 9” |
6.0 K.W. |
d) 18” x 9” x 9” |
6.0K.W |
|
|
COLONY COUNTER DIGITAL DISPLAY:
The housing is constructed with heavy guage Mild Steel and finished attractively. A counting plate with Wolf hugel ruling is fitted with magnifying glass on front slope. A special pentype probe allow marking and counting simultaneously. Counting is registered on a four digit, resetable DIGITAL COUNTER. A fluorescent light provided uniform day light illumination, Range O-999O-9999. |
|
|
ROTARY SHAKER:
Electric fixed Speed and Variable Speed Regulator
Ideal for shaking on Erlen Meyer Flasks. It is sturdy Mild Steel angle Iron structure fitted pulley to hold different size conical flasks upto 500 ml. And constant speed of 200 R.P.M. The flasks remain fix in lotus clamps provided on the platform. TIMER 0 60 MINUTES at Extra. |
| No. of flask Capacity 500 ml. Platform |
| 9 flasks |
20” x 20” |
| 12 flasks |
20” x 24” |
| 16 flasks |
24” x 24” |
| 25 flasks |
30” x 30” |
| 36 flasks |
32” x 32” |
| 49 flasks |
36” x 36” |
| 100 flasks |
48” x 48” |
|
|
ROUND WATER BATH Electric & Thermostat
Made of Stainless Steel provided with Immersion type of heater with concentric rings. |
| Size |
Rating |
| a) 8” Dia x 6” Ht |
1 K.W. |
| b) 10” Dia x 6” Ht |
1 K.W. |
| c) 13” Dia x 6” Ht |
1.5 K.W. |
|
|
THERMOSTATICALLY CONTROLLED and DIGITAL DISPLAY WATER BATH:
Inner S.S./ Inner-Outer S.S/ Inner S.S Outer Acrylic
Double walled, outer made of Mild Steel painted and made of Stainless Steel Temperature is controlled by Hydraulic capillary type thermostat having accuracy + .1 0 C with Concentric Rings |
| Size |
Hole |
Rating |
| a) 14” x 10”x 4” |
6 |
1K.W |
| b) 16” x 12” x 4” |
12 |
1.5 K.W |
|
|
CONSTANT TEMPERATURE
CIRCULAR WATER BATH:
Digital Display indicating controller Built-In-Bath. Rectangular in shape. Inside reservoir is made of Stainless Steel finished in stove enamel attractively . In between wall is filled with glass wool. A circulatory Motor pump with stirrer is mounted on the top and fitted on one side of the bath. Temperature range ambient to 1000c provides most sensitive control by a Digital Display + 0.5 0 C accuracy. Heating is by permanent heater and one booster heater. Control gear consist of switches for motor and heaters, etc. |
| Working Size: 12” L x 10” W x 8” H |
Rating 1.5 KW |
|
15” L x 12” W x 10” H |
Rating 2 KW |
|
|
AUTOMATIC WATER - STILL (MANESTY TYPE):
Close type condenser and Automatic Open condenser
For pyrogen free distilled water. The full body is made of Stainless Steel fitted with safety with ejection type immersion heaters. A constant water level arrangement is provided. A steam baffle is provided to take steam direct to the condenser. The stated out-put of the still is approximate as it is bound to vary according to the Voltage of the MAINS. |
| Capacity/hr |
Rating KW |
Capacity/hr |
Rating KW |
| a) 2 Ltr. |
1.5 |
f) 12 Ltr |
9.5 |
| b) 4 Ltr |
3.0 |
g) 15 Ltr |
12.5 |
| c) 6 Ltr |
4.5 |
h) 20 Ltr. |
Single phase 14.0 |
| d) 8 Ltr |
6.0 |
i) 20 Ltr. |
Three phase 14.0 |
| e) 10 Ltr |
8.0 |
|
|
|
 |
PORTABLE AUTOCLAVE:
I) Single Body made of heavy guage. Stainless Steel Welded . The lid heavily polished and fitted with pressure guage, steam exhaust valve, safety valve, handle with stand pressure of 15 lbs/Sq. inch Working on 230 Volts AC single phase
Size: Dia, 30 x 30 cms. Ht Rating: 1.5 KW |
|
| |
VERTICAL AUTOCLAVE:
Inner body is made of heavy guage Stainless Steel welded. The lid and the ring are made of Stainless Steel Plate. The lid, heavily polished and fitted with Pressure Guage, safety Valve and Steam exhaust valve, and safety valve is set to blow of 20lb /sq. inch to remove excess steam and maintain constant pressure. A rubber gasket is fitted in the ring to ensure steam tight joints. Outer cover made of polished Stainless Steel with legs. Fitted with immersion water heater/s. with foot lifting arrangement for Bigger Size of Autoclove. Perforleted basket-made of Aluminium Stainless it also provided |
| Working size |
Rating |
Accessories: ( If Require) |
| 1) 12”Dia x 20” Ht |
2.0 KW |
Fully Automatic Dunfoss Pressure Switch with Analogue
Timer & water level Indicator |
| 2) 14”Dia x 22” Ht |
3.0 KW |
Electronics Timer Range 0-minutes with Digital Display |
| 3) 16”Dia x 24” Ht |
3.0 KW |
Automatic pressure control Switch cuts off power to the
heater once autoclaving Pressure of Preset desired level
achieved Accuracy _+ 0.5 PSI |
| 4) 18”Dia x 24” Ht |
4.0 KW |
Digital temperature indicator with suitable sensor with an
Accuracy _+ 1 0 C |
| 5) 18”Dia x 28” Ht |
4.0 KW |
Circular Chart recorder |
| 6) 22”Dia x 30” Ht |
6.0 KW |
|
| 7) 22”Dia x 36” Ht |
6.0 KW
|
|
|
|
